Biodegradable Chain Oil

Sustainable, Renewable, Biodegradable

Chemiphase are proud to launch our latest development in biodegradable lubricants, biomex SRB Chain Oil.

biomex SRB Chain Oil

biomex^TM SRB chainsaw oil is a highly advanced, fully biodegradable, vegetable based chainsaw oil designed to give maximum lubrication by resisting fling, leaving more oil on the bar and chain whilst reducing the impact of oil contact with the environment.

Features

• Biodegradability  >90% (CEC-L-33-T-82)
• Non-toxic to animal and plant life
• Non-toxic to fungus and bacteria often found in woodlands
• Non-toxic to aquatic life
• Low surface penetration
• A high flash point, flare point and smoke point

Typical Physical Characteristics

• Viscosity Grade                                                 SAE 40
• Density @ 15°C                                                  0.920
• Viscosity @ 40°C                                              68.0 cSt
• Viscosity @ 100°C                                           15.6 cSt
• Viscosity Index                                                 245
• Appearance                                                         Clear Amber Liquid
• Product Code                                                      14100

Biodegradable Transmission Fluid – Bio UTTO

Sustainable, Renewable, Biodegradable

Chemiphase are proud to launch the latest development in biodegradable lubricants, SRB Biodegradable Transmission Oil – Bio UTTO.

SRB BIO-UTTO (Universal Tractor Transmission Oil)

BIO-UTTO is a biodegradable multi-functional tractor transmission fluid that may be used in powershift and mechanical transmissions, oil immersed (wet) brakes, hydraulics, final drives, PTO’s, hydrostatic drives, reduction hubs, power steering and torque converters.

This product is designed for use in vehicles which may be used in environmentally sensitive areas including: forestry farming, construction, horticulture, quarrying etc.

Features

• Outstanding oxidation stability, permitting safe equipment operation under high temperature and high load even with low fluid viscosity
• Excellent drive train protection
• Good wet brake control (preventing brake chatter)

Important Note: This product is not suitable for use in protected water zones

BIO-UTTO meets or exceeds the performance requirements of the following specifications:

CASE NEW HOLLAND	MAT 3525, MAT 3505
FORD NEW HOLLAND	M2C-134D
JOHN DEERE	JDM J20C
CASE	MS1206, MS1207, MS1209
MASSEY FERGUSON	CMS M1141, M1143, M1145
API	GL-4
FNHA-2-C-201.00

Typical Physical Characteristics

Viscosity Grade	SAE 10W-30
Density @ 15°C	0.900
Viscosity @ 40°C	47.4 cSt
Viscosity @ 100°C	11.2 cSt
Viscosity Index	239
Appearance	Clear Amber Liquid

Biodegradable 2 Stroke Oil

Sustainable, Renewable, Biodegradable

Chemiphase are proud to launch our latest development in biodegradable lubricants, biomex SRB 2 stroke oil.

biomex SRB 2 Stroke Oil

Is a premium quality 2 stroke oil, blended from the finest, most advanced ash-less mineral oil additives, combined with quality synthetic esters. This ensures the thermal stability, anti-wear properties, engine cleanliness and corrosion protection properties demanded of a modern 2 stroke oil, whilst offering outstanding biodegradable characteristics

It is suitable for ALL 2 stroke machinery including chainsaws, grass trimmers and also 2 stroke motorcycles.

Suitable for use in oil injection systems or as a pre-mix.

During the last few years, a rapidly growing interest has emerged for biodegradable, high performance engine oils, which help to reduce both carbon footprint and pollution.

biomex product attributes

Biocorp have developed an ester based fluid, SRB 2 Stroke Oil which offers outstanding engine performance and biodegradation characteristics.

● SRB 2 Stroke Oil combines this technology with the most advanced additives available to ensure that users of high performance 2-stroke outboard engines achieve the maximum possible engine life whilst maintaining maximum power.

● SRB 2 Stroke Oil proved to be excellent in various screening tests in addition to the official NMMA TCW-111 test,  GP 2 Stroke Oil is certified TCW III and also has passed strongest chainsaw lubrication tests.

● SRB 2 Stroke Oil can successfully be used in a wide range of engines from small single cylinder units up to high output multi-cylinder versions.

biomex SRB Engine Oil 5W Product Specifications

Readily biodegradable according to CEC-L-33A-94

Biodegradation :

To establish Biodegradation specification 6 workshops were held in Switzerland in which government laboratories, environmentalists, engine manufacturers, oil and additive manufacturers participated.
A Test procedure was established with the intended purpose of comparing the biodegradability of 2-stroke engine lubricants in water.
This test method was given the title : “Biodegradability of 2-stroke cycle outboard engine oils in water” and is identified by the code CEC-L-33-T-82.

Biodegradable Hydraulic Oil

Sustainable, Renewable, Biodegradable

Chemiphase are proud to launch our latest biodegradable hydraulic oil, biomex SRB 46ES hydraulic oil.

biomex SRB 46ES hydraulic

Is formed with high viscosity index biodegradable hydraulic oils based on state of the art synthetic carboxylic esters, showing high resistance against oxidation and containing specific ashless (non-metallic) additives to improve their general performance. These esters are renewable from sustainable sources and deliver a truly premium quality performance with no equal in the world of hydraulic oils.

biomex product attributes

● Developed to answer the growing demand for environmentally friendly, extended life lubricants

● Intended for all mobile and stationary applications where loses in the nature may occur such as off highway and tunnelling equipment, offshore facilities, boats, sluices etc.

● Compatible with all types of elastomer currently used in hydraulic systems.  They are not compatible with natural rubber or EPDM.

biomex SRB 46ES hydraulic - is approved by / meets the performance requirements of:

ISO FDIS 6743/4-Cat.HV

DI 51524 part 3 (*)

SS 155434

biomex SRB 46ES hydraulic Product Specifications

ISO VISCOSITY GRADE	32	46
DENSITY @ 15°C (IP 365)	0.946	0.955
VISCOSITY @ 40°C (ASTM D445)	32.0 cSt	46.0 cSt
VISCOSITY @ 100°C (ASTM D445)	6.4 cSt	8.4 cSt
VISCOSITY INDEX (ASTM D2270)	157	161
APPEARANCE (VISUAL)	Clear Amber	Clear Amber

Biodegradable Engine Oil 5w-40

Biodegradable Engine Oil

Chemiphase are proud to launch our latest development in biodegradable lubricants, biomex SRB biodegradable Engine Oil 5w-40.

biomex SRB Engine Oil 5W-40 API SL CF CG-4

A superior lubricant made from the finest fully synthetic, rapidly biodegradable ester base stocks available, together with state of the art performance additives. An innovative product of the very highest quality specially developed to outperform fully synthetic fossil based oils whilst having minimal environmental impact. Specially developed to exceed service category API SL / CG-4 for use in both petrol and turbo diesel engines in cars, vans, buses, trucks, plant & machinery

biomex product attributes

● Product rationalisation potential

● Synthesis Commercial 5W-40 meets the latest EURO 5 to older generation engines

● Low Wear & Low Deposits

● Advanced additives deliver high levels of component cleanliness and wear protection required by most European, US and Japanese engines

biomex SRB Engine Oil 5W- is approved by / meets the performance requirements of:

Mercedes Benz MB 228.51 / MB 228.5
ACEA E4, E6, E7
Scania LDF – 2
MAN M3477, M3277 Reduced Ash
Renault RVI, RXD, RLD, RLD 2
Clean Diesel SB009 API CI-4
VOLVO VDS – 3
MTU TYPE III

biomex SRB Engine Oil 5W Product Specifications

Viscosity Grade	SAE 5W – 40
Viscosity @ 15 deg C	0.859
Viscosity @ 40 deg C	98.0 cSt
Viscosity @ 100 deg C	14.7 cSt
Viscosity Index	156
Appearance	Clear Amber Liquid

biodegradable lubricants – Sustainable, Renewable & Biodegradable

Sustainable, Renewable, Biodegradable

Chemiphase have launched the latest developments in Biodegradable Lubricants

During the past few years market demand for SRB (sustainable, renewable, biodegradable) oils has emerged driven by environmental concerns and technological development of available feedstocks.

The biomex^TM SRB lubricants are high performance products which significantly reduce both carbon footprint and pollution potential.

All biomex^TM SRB lubricants are made from state of the art synthetic non fossil base stocks outperforming  the best fossil based products available.

All biomex^TM SRB products are biodegradable after their long service life.

biomex^TM  lubricates are available in 1 litre, 5 litre, 20 litre or 200 litre drums.

biomex^TM  greases are available in 400ml cartridges and 1 litre tins.

biomex^TM  2-stroke is also available in 100ml shots.

For More Information please click here

Help & Advice for your #biodiesel to run through the winter with Coldflow 350

Is your biodiesel ready for winter?

This post is to help our customers maximise the potential of Coldflow 350 and 402 in their biodiesel’s.

To achieve the lowest pour points of biodiesel using Coldflow 350/402 there are a few basics which must be adhered to allow your fuel to reach low pour points which in turn will help your biodiesel run through the winter.  Coldflow 350 is a biodiesel winter additive for biodiesel blends made from good quality oils like used cooking oils which contain less than 10% palm oils or heavy oils.  Coldflow 402 is for biodiesel’s made from 10% or more Palm oils or other heavy oils with poor pour points.

• Do not add the Coldflow products to your biodiesel when it is already cold.  The chemistry behind the Coldflow range poison’s the sites where crystals are forming in the fuel and delays this from happening until a much lower temperature has been achieved.  This will not happen if there are crystals currently formed in the fuel as they have already been formed.
• For the best results when adding the Coldflow range the biodiesel must be at least 5 deg C above the pour point of the fuel.  To gauge the pour point of your fuel its a simple test.  Take a sample of your fuel when produced and leave in a freezer and let it begin to freeze.  As the biodiesel freezes you will see clouding occur which is the beginning of the crystals forming.  At this point take a temperature reading and add 5 deg C.  This is the pour point of your fuel.
• Now you have the optimum temperature for your biodiesel to blend the Coldflow into your fuel.  To achieve the best results you must mix the Coldflow’s into the fuel very thoroughly.  To do this we recommend either a mixing paddle or a recirculation pump.  If you are using a re-circulation pump we suggest adding the Coldflow to the fuel and re-circulating for at least 20 minutes to ensure the product has mixed into the solution.
• The Coldflow range has a particle size sub 1 micron so will easily pass through 1 micron filters.  We do suggest though that if you are centrifuging your biodiesel after adding the Coldflow it does have the potential to be removed.  So if possible centrifuge the biodiesel before you add the Coldflow’s.
• Dilution rates, as mentioned earlier we suggest ascertaining the level that you biodiesel begins to gel to achieve a baseline for your fuel.  We then recommend running small-scale lab tests with different dilutions to achieve a level that suits your fuel.  Chemiphase recommends a dilution rate of between 3 & 5 Litres of Coldflow’s per 1000 Litres of biodiesel.  Try a small-scale 3:1000 Litre sample, a 4:1000 Litre sample and a 5:1000 Litre sample to see the benefits of adding a little bit more.  You may find the 5 Litre per 1000 Litres of biodiesel achieves -25 deg C and may be far too high for the Uk.  If this is thee case you may be happier using a 3 Litre per 1000.
• If you are blending your biodiesel with mineral diesel the Coldflow range will act as a winter additive for the biodiesel and the mineral diesel.

I hope this helps but if you need more information please do get in contact with us as we would be more than happy to help.  For more information on the coldflow range please click here

Regards,

Ben Wiggins

Director of Chemiphase Ltd.

Odoursolv – Heavy Duty Re-Odouriser

Odoursolv – Heavy Duty Re-Odouriser – “Treats All Types Of Odours”

Odoursolv is a heavy duty reodouriser commonly used in drainage and sewer systems. The concentrated formula attacks bacteria, neutralising the source of the smell. Odoursolv can be used neat, diluted to a ratio of 50:1 or in conjunction with a fogging machine. We recommend this product to Industrial maintenance, Steel fabricators, Aircraft and Mining equipment, Plant hire companies, Chemical Plants, Transport Companies, Pipeline companies and many other industrial maintenance sections.

Benefits

• Odoursolv is a heavy duty re-odoursiser commonly used in drain and sewerage systems
• Odoursolv will remove strong un-wanted smells
• Odoursolv is very effective in food production areas where odours are a concern
• Odoursolv can be used neat / diluted up to 50:1 with water / fogging machine for larger areas
• Odoursolv contains a bactericide which will penetrate the cause of odour and break down bacteria

How to Use

Odoursolv can be sprayed around affected areas with up to 50 parts cold water.  Can be pumped around sewage plants using aerial fogging systems.

Application

Odoursolv can be used on sewage farms, stables, breweries, schools, hospitals, public toilets etc.

For more information please click here

Biokatz Biological Drain Treatment – The Natural Drain Treatment

Natural Drain Treatment Which Stops Drains Blocking With Fat & Grease

Biokatz Drain Block is a biological treatment for fat and grease which is the most common cause blocked drains. Biokatz blocks are being used by food manufacturing companies / fast food outlets etc where fat and grease is used / produced in large quantities.  Generally fat and grease deposits make there way to the drains where it cools and hardens and blocks the drain / pit.  At this point generally a drain clearing machine is required to be called out or the drain is manually dug out to clear the blockage.  Both are very expensive and time consuming.  The solution is the Biokatz Drain Block!

Benefits

• The Biokatz Drain Block is submerged directly to the drain / pit and held using a drawstring.  This will enable the Biokatz Drain Block to rise and fall with the flow of the outlet pipe where the fat and grease build up.
• Once the Biokatz drain block is activated in the water it will begin to release bacteria which will consume the fat and grease build ups and keep the drain flowing.
• Biokatz Drain Blocks will continue to work for 365 days a year
• Biokatz Drain Blocks are very cost effective against drain clearance costs and manual digging out
• 1 Block will last for 2 months from insertion
• No Harmful or Toxic Chemicals required.  Biokatz blocks are classed as a Non Hazardous Product

 How it works:

Bio-Katz products use live Bacterial Cultures and their Free Enzymes to Effectively Digest organic Waste & Odours.  Bacteria are living uni-cellular micro-organisms and they are present throughout our environment.  In our Bio-Katz products we have formulated several bacteria strains to essentially degrade waste, control odours and remove specific unwanted chemicals. In essence the bacteria species are very effective decomposing and digesting organic material.  All bacteria must eat to stay alive. So bacteria produce Enzymes which break down organic wastes into a liquid form that then can be absorbed by our bacteria. Subsequently the bacteria convert the absorbed liquids into carbon dioxide and water which are harmless to our environment. Enzymes are actually catalysts which initiate the chemical processes involved in digestion.

 

Contra to popular misconception neither bacteria nor their enzyme secretions are miniature carnivorous insects, chewing up waste material. Rather, bacteria are like sponges that absorb organic waste that has been previously liquefied by enzymes. The bacteria will subdivide approximately every 20 minutes into two identical and fully functional duplicates of the original. This reproduction will continue with time and as long as there is an adequate amount of food source exists to fuel the process. The higher the Bacterial Count will produce, increased enzyme activity which then results in faster decomposition and digestion of organic waste materials.  We apply this technology to eliminate waste and unwanted odours to control Fat/Grease traps, odour control and cleaning actions. Compared to our competitor products that contain caustic or other potential harmful chemicals currently used.  Bio-Katz products contain carefully formulated bacteria which they and their enzymes produce a safe solution for your application and our environment.

For more information on this product please click here

Checkmate – Grease and odour Treatment Chemical

Checkmate – Grease & Odour Treatment Control System

Checkmate is the natural system for resolving problems caused by odour and grease. It is totally free of all chlorinated solvents such as ODCB. The formulation consists of environmentally friendly derivatives producing a biodegradable, versatile product. Checkmate will emulsify fats and greases and prevents re-depositing. It is highly effective yet causes no pollution.  Checkmate has a unique molecular construction which, combined with its natural anti-bacterial and fungal disinfection action, will neutralise malodours without the residual aromas associated with common masking agents.  Checkmate is ideal for use in effluent systems, drains, gullies, sewage treatment, skips, refuse vehicles, in fact anywhere where grease and odours are a problem. Checkmate can be dosed manually by dosing system or by drip feed.

 Benefits

• Contains no chlorinated solvents, Lipophilic, Non flammable,
• Biodegradable,
• Manufactured with naturally occurring resources,
• Non hazardous,
• Emulsifiable
• Environmentally safe,
• Rapidly softens & liquifies grease & fats,
• Will not re-deposit grease & fats,
• No fire risk,
• Attracts & neutralises malodours

How To Use - Management of problems caused by grease & odours

Sewage - Spray Checkmate directly on to build ups of grease in pump wells, skimmers, settlement tanks, grease traps etc.  Then dose by pump or drip feed to maintain control.  Dosage will depend on each individual application and will be assessed according to technical data.

Sewage / Effluent - 10 Litres neat Checkmate per million litres of solids.  Dose by pump or drip feed.

Filter Beds - Apply 2-5 Litres neat Checkmate per million litres flow rate.

Slurry - Apply 1 Litre neat Checkmate per 1000 Litres (I.C. Mtr)

Refuse Trucks, waste chutes etc.  Dilute up to 20:1 to clean down and control odours.

Landfill Sites - Dilute up to 50:1 and spray 2 Litres per square meter.

For more information on this product please click here